Omron ZS-HL User Manual page 62

Section3
Measuring Multiple Items Simultaneously (Multi-Task)
15.
Set the threshold value using the
same steps from 7 to 9.
Measurement
16.
Set the mode switch to RUN.
17.
Select [Yes] and save the settings.
18.
Measure
pressing the UP key.
Sampling is performed while the UP
key is being pressed.
19.
Check the measured value.
You can check the measured value
for each TASK by switching the
display.
When a measurement is performed using the actual line, the Sensor Controller can start the measure-
ment by external input or self-trigger.
ZS-HL
3-10
User's Manual
the workpiece
Switching the Display of the Measured Value p.4-2
p.5-19
FUN RUN
TEACH
Is change sav ed?
1 YES
while
T r i g g e r ON
SUB:THRESH
Measured
value
2 NO