Bank Switching (Change Of Device Setup) - Omron ZS-HL User Manual

Section4

Bank Switching (change of device setup)

Bank Switching (change of device setup)
ZS-HL can hold up to four sets of settings, which are called a bank. When the device setup
is changed, you can switch the bank externally.
• What is bank?
The settings for measurement
SENSING
OUTPUT
• Example of bank switching for settings
If you register settings of various classes,
Setting for product class A
SENSING
OUTPUT
Measuring operation
with the contents set
in BANK1
If only the "threshold value" is different in the settings for a bank, by changing the mode of the bank, you
can increase the number of banks from 4 to 32.
ZS-HL
4-10
User's Manual
FILTER
I/O SET Threshold value
FILTER
I/O SET Threshold value
BANK1
BANK2
BANK3
BANK4
SENSING
TASK1
TASKSET FILTER
Threshold value
OUTPUT
I/O SET
Selecting the bank mode p.5-28
are held as one bank.
SENSING
OUTPUT
Register the different settings
for changing the device setup.
Setting for product class B
SENSING
OUTPUT
Switch
to BANK2.
In Multi-Task
It is easy to change the device setup.
mode
TASK4
FILTER
TASKSET
Threshold value
OUTPUT
BANK1
FILTER
I/O SET Threshold value
BANK
Measuring operation
with the contents set in
BANK2
FILTER
I/O SET Threshold value
BANK2
BANK3
BANK4
TASK1 to TASK4 are
specified in the settings
for each bank.