Omron SYSMAC CJ Operation Manual page 240

All BASIC commands
228
Bit
9, 8 Windowing function choice:
• 00: No windowing
• 01: Inclusive windowing
• 11: Exclusive windowing
10 Set this bit to use filtering function
SERVO MOTOR
/i
Example A disc used in a laser printing process requires registration to the Z
marker before it can start to print. The example code locates to the Z
marker, and then sets it as the zero position.
REGIST(1) 'set registration point on Z mark
FORWARD 'start movement
WAIT UNTIL MARK
CANCEL 'stops movement after Z mark
WAIT IDLE
MOVEABS (REG_POS) 'relocate to Z mark
WAIT IDLE
DEFPOS(0) 'set zero position
Function (Encoder Interface)
Z MARK
SENSOR BEAM
SENSOR
RAM
Section 4-2