Change [Device] Poll List Input Form, Page 2 - Paradyne COMSPHERE 6800 Series Command Reference Manual

Page 2
Page 2 displays the current active devices on the poll list for the specified device, and allows you
to add or delete devices to the poll list, or to skip polling for a specific device. It also enables you
to set the CNN event for the specified device(s). Figure 2-14 is a sample of the second Change Poll
List input form.
This input form contains the following fields:
DEVICES ON POLL LIST (Display field)
State
6800-A2-GB31-20
Figure 2-14. Change [Device] Poll List Input Form, Page 2
Displays the names, network addresses and the current state of devices that are currently
on the poll list(s) of the specified device(s).
Use this field to remove or skip devices on the poll list.
Enter skipped to stop polling a device. The device remains on the poll list but it is not
polled. The device is skipped during polling and alert reports are not received. However,
the primary data channel remains enabled, and commands can still be sent to the device.
Enter active to resume polling of a skipped device.
Enter delete to remove a device from the poll list.
A pop-up menu is available listing valid selections.
January 1997
2Modem/DSU Commands
2-61