Display Exception Reporting Thresholds Results Form, Page 2 - Paradyne COMSPHERE 6800 Series Command Reference Manual

COMSPHERE 6800 Series Network Management System
Page 2
Page 2 of the results form displays signal profile parameters for the network tests supported by the
exception reports. Figure 2-37 is a sample of Page 2 of the results form.
Figure 2-37. Display Exception Reporting Thresholds Results Form, Page 2
This page of the results form lists the current threshold values for exception reports, as follows:
RSQ
RSL
PHASE JITTER
BACKGROUND NOISE
FREQUENCY OFFSET
Refer to the Change Exception Reporting Thresholds (chert) command for more information on
these thresholds.
2-128
The threshold figure of merit value for the received signal quality measure.
The threshold value (in dBM) for the received signal level measure.
The threshold figure of merit value for the phase jitter measure.
The threshold figure of merit value for the background noise measure.
The threshold values for the frequency offset measure.
January 1997 6800-A2-GB31-20