Circuit Quality Results Form For 3900 Series Modems - Paradyne COMSPHERE 6800 Series Command Reference Manual

This results form contains the following fields:
Bit Error Rate
Receive Level
Signal/Noise
Retrains
Blown Startups
A sample Circuit Quality results form for a COMSPHERE 3900 Series modem is shown in
Figure 2-22.
Figure 2-22. Circuit Quality Results Form for 3900 Series Modems
6800-A2-GB31-20
Displays the ratio of the number of bits in error to the number of bits received.
Displays the measured receive level. A normal received signal level is –16 dB, 4 dB.
Displays the measured signal-to-noise ratio. An acceptable signal to noise ratio is 24 dB
or greater.
This field is reserved for future use.
This field is reserved for future use.
January 1997
2Modem/DSU Commands
2-85