Dial Command Input Form - Paradyne COMSPHERE 6800 Series Command Reference Manual

Dial Command Input Form

A sample Dial Command input form is shown in Figure 2-28.
This input form contains the following fields:
Device(s) (Required field)
Number to dial (Required field)
6800-A2-GB31-20
Figure 2-28. Dial Command Input Form
Enter the device(s) that are to initiate a call. One or more devices may be specified.
Standard addressing format applies to the input. For information on device addressing,
refer to Appendix D of the COMSPHERE 6800 Series Network Management System
User's/System Administrator's Guide.
Enter the number to be dialed. There are several options and formats available.
You can specify a telephone number.
For DATAPHONE II, COMSPHERE 3400/4400 Series, and COMSPHERE 3600 Series
devices, you can specify a telephone number using the following characters:
0–9 Numeric dialing digits. (2296, 2656, 3400/4400, 3600)
* or # Represents special characters used in PBX dialing. (2296,
3400/4400, 3600)
(,), space, or – Improves readability (ignored by the modem). (2296, 3400/4400,
3600)
p, P, or \ Changes the current dialing method to pulse dialing. (2296,
3400/4400, 3600)
January 1997
2Modem/DSU Commands
2-105