Display Exception Reporting Thresholds Results Form, Page 1 - Paradyne COMSPHERE 6800 Series Command Reference Manual

Page 1
Figure 2-36 is a sample of Page 1 of the results form.
Figure 2-36. Display Exception Reporting Thresholds Results Form, Page 1
This page of the results form displays the failure threshold values currently set for each of the
network tests. Exception reports are generated for reporting failures when the set thresholds are
exceeded for the following network tests:
Automatic Network Test
Circuit Loss Inbound
Circuit Loss Outbound
Device Test
Digital Test
End-to-End Block Test
Offline Test
Receive Signal Level
Receive Signal Quality
Report Terminal Power
Signal Profile
Refer to the individual test commands in this chapter for additional information on the fault
thresholds.
6800-A2-GB31-20 January 1997
2Modem/DSU Commands
2-127