Call Detail Display (Cded) - Paradyne COMSPHERE 6800 Series Command Reference Manual

Network management system, communications products support
Table of Contents

Advertisement

Call Detail Display (cded)

Use the cded command to obtain a report that displays detailed information about COMSPHERE
3800/3900 Series modem calls. Information is retrieved from the call detail database. For each call,
this information includes the following:
For most commands, NMS enables you to specify the destination for the command's results and
schedule its execution. If the last page of the input form cannot accommodate the Destination for
results and Schedule execution fields, an additional page is provided. For a complete description
of these fields, refer to Chapter 1, Introduction.
Access Level:
Abbreviation:
Restrictions:
Routine:
Schedule:
Related Commands: Daily Historical Utilization (dhu)
Call Detail Display Input Form
The Call Detail Display input form contains the following fields:
Device(s) (Required field)
REPORT PERIOD
6800-A2-GB31-20
Device name of the local modem
Device name of the remote modem (Available, only if the call was placed in Maintenance
mode)
Connect time for the call
Call duration
Line speed of the call
The reason the call disconnected
Help desk, Data Technician, Manager, System Administrator
Abbreviation: cded
Only Model 3811 modems are included in the data used to calculate results.
If you specify another 3800 Series modem model number, the results form
will display a list of these modems indicating they are not included in the
results.
Yes
Yes
Call Occurrence Distribution (cod)
Call Duration Distribution (cdud)
Enter the device(s) for which call detail information will be displayed. One or more
devices may be specified. Standard addressing format applies to the input. For
information on device addressing, refer to Appendix D of the COMSPHERE 6800 Series
Network Management System User's/System Administrator's Guide.
Enter a report period for generation of the report. The report will include call information
from the starting date to the ending date specified.
January 1997
2Modem/DSU Commands
2-11

Advertisement

Table of Contents
loading

Table of Contents