Circuit Loss Outbound Results Form - Paradyne COMSPHERE 6800 Series Command Reference Manual

Tone frequency (Required field)

Circuit Loss Outbound Results Form

A sample Circuit Loss Outbound results form is shown in Figure 2-19. The results form lists
device information for each control/tributary pair, the specified tone frequency, and the measured
signal level (in dBm) of the outbound signal for the specified device(s).
6800-A2-GB31-20
Enter the tone frequency to be transmitted in Hz. Valid entries are 1004, 1804, or 2804.
A pop-up menu is available listing valid selections.
Figure 2-19. Circuit Loss Outbound Results Form
The COMSPHERE APL modems return a receive signal level rather
than a circuit loss.
January 1997
NOTE
2Modem/DSU Commands
2-81