Clear Call Directory (Clcd) - Paradyne COMSPHERE 6800 Series Command Reference Manual

Network management system, communications products support
Table of Contents

Advertisement

COMSPHERE 6800 Series Network Management System

Clear Call Directory (clcd)

Use the clcd command to clear all entries in the call directory of 3900 Series modems or one or
more COMSPHERE 3400/4400 Series modems equipped with a DBM. To do this for
COMSPHERE 3800 Series modems, use the chcd command.
For most commands, NMS enables you to specify the destination for the command's results and
schedule its execution. If the last page of the input form cannot accommodate the Destination for
results and Schedule execution fields, an additional page is provided. For a complete description
of these fields, refer to Chapter 1, Introduction.
Access Level:
Abbreviation:
Restrictions:
Routine:
Schedule:
Related Commands: Change Call Directory (chcd)
Clear Call Directory Input Form
The Clear Call Directory input form contains the following fields:
Device(s) (Required field)
Set CCN event (Required field)
Clear Call Directory Results Form
The Clear Call Directory results form lists device information for each device specified and
displays a text message indicating whether or not the call directory was cleared.
2-88
Data Technician, Manager, System Administrator
Abbreviation: clcd
None
Yes
Yes
Display Call Directory (dscd)
Enter the device(s) whose call directories are to be cleared. Multiple devices can be
specified. Standard addressing format applies to the input. For information on device
addressing, refer to Appendix D of the COMSPHERE 6800 Series Network Management
System User's/System Administrator's Guide.
If configuration change notification has been enabled for the specified device, use this
field to indicate whether or not this configuration change will be reported to the NMS.
Enter yes to report this change to the NMS.
Enter no (default) to prevent this change from being reported to the NMS.
If configuration change notification has been disabled for this device, configuration
changes are not reported regardless of what is entered in this field.
A pop-up menu is available listing valid selections.
January 1997
6800-A2-GB31-20

Advertisement

Table of Contents
loading

Table of Contents