Page 94 - Wake-up Alarm Timeouts
Wake-up Alarm Timeouts
Maid Status Update
Page 94 - Guest Services
38DHB0002UKDJ – Issue 3 (12/00)
Guest services include options for Reception and Guest phones to set up wake-up
alarm calls. To support that feature the INDeX provides two timeouts.
– Guest wake-up alarm :
Sets for how long a guest alarm rings.
– Guest alarm repeat :
Sets how long the INDeX should wait before repeating an unanswered
alarm. After a third unanswered attempt at an alarm, notification of the
unanswered alarm is transferred to the Reception group.
To set the alarm timeouts :
1. From the Administration menu, select System and then Timeouts.
2. Select Guest wake-up alarm and enter how long an alarm call should ring if
unanswered.
3. Select Guest alarm repeat and enter how long the INDeX should wait between
unanswered alarm calls.
The status of rooms set to Clean can be set to automatically change to Unclean at
a set time each day.
1. From the Administration menu, select System and then Facility options.
2. Select Automatic Maid Status Update and enter the time at which guest room
status should change from Clean to Unclean. Note that if the time is left blank
then the automatic change is disabled.
Guest Services
Programming Manual
INDeX 9.1