Table of Contents
Advertisement
Cordless Integration
Cordless Integration
Introduction
Mobile Number
Programming Manual
INDeX 9.1
The INDeX supports connection to an INDeX DECT. That cordless system uses the
DECT standard.
Each cordless extension requires a two-wire port link from the INDeX. Full details
are given in the INDeX DECT Installation Manual.
– INDeX DECT V24 Integration :
A permanent serial lead link between the INDeX and INDeX DECT provides
enhanced features for INDeX DH1/20DT cordless handsets. This uses a
DECT log output from the INDeX and is fully covered by the INDeX DECT
Installation Manual.
– Integrated INDeX DECT (NA INDeX 30):
This feature is provided by the CSLC cassette and is covered by the INDeX
CSLC Installation Manual.
In some cases, users of cordless extensions attached to the INDeX may still also
have normal desk telephones. If the directory number of the cordless extension is
entered as the desk telephone's Mobile twin number, the INDeX provides several
features:
– Calls to the desk telephone also ring the cordless extension simultaneously.
– If either the desk telephone or cordless extension is busy, then calls to the
desk telephone receive busy (if the desk telephone has a Divert on busy set
then that is used).
Though intended mainly for users with a desk and cordless extensions, these
features can be used with any two extensions. Mobile twin number does not work
with the Peacock cordless system.
To enable mobile number use :
1. From the Administration menu select System and then Switch licences.
2. Select Mobile number and enter the licence key. If correct, the licence key is
displayed followed by yes and an option number in brackets.
– The licence keys must have option 1 if it is also required for INDeX DECT
V24 Integration (refer to the INDeX DECT Installation manual).
To associate a mobile (cordless) with a Station :
1. From the Administration menu select User and enter the user directory
number of the main phone (the one that will be called by other users).
2. Select Extended functions.
3. Select Mobile twin number and enter the directory number of the secondary
phone (the one that should ring simultaneously with the main phone). Note that
the secondary telephone's Mobile Twin Number is set to that of the main
phone.
Cordless Integration - Page 74
38DHB0002UKDJ – Issue 3 (12/00)
Page 74
Advertisement
Table of Contents
