User Programming
Remote Forward - Forward Bar
Hotline
Programming Manual
INDeX 9.1
Remote forwarding allows user's to set their divert all number and switch its use on
or off from another terminal. The remote forward option can be used to bar the
remote forwarding of a user.
To allow/bar remote forwarding by a user :
1. From the Administration menu, select User and enter the user's directory
number.
2. Select Personal status.
3. Select Remote forward to change its setting.
The hotline function allows a user to automatically dial a number if their associated
terminal is left off-hook for a set period. The programmed hotline number can be a
user, group, speed dial number or a line number. You can vary the timeout before
the INDeX automatically dials the number, including a zero timeout (i.e.. dial
immediately).
To change a user's hotline number settings :
1. From the Administration menu, select User and enter the user's directory
number.
2. Select Extended functions.
3. Select Hot line number.
– To dial a terminal or group, enter the directory number.
– To dial a speed dial, enter S followed by the speed dial number. Both
personal and system speed dials can be used for hotline operation.
4. Select Hot line timeout and enter the timeout required in seconds.
Remote Forward - Forward Bar - Page 67
User Programming - Page 67
38DHB0002UKDJ – Issue 3 (12/00)