Table of Contents
Advertisement
Page 56 - Setting up a Time Analysis Process
Creating Exception Days
Setting up a Time Analysis Process
Page 56 - Automatic Route Selection (ARS)
38DHB0002UKDJ – Issue 3 (12/00)
To add/change exception days :
1. From the Administration menu, select Automatic Route Selection and then
Time Analysis.
2. Select Time Map and enter the map number.
3. Select Month plan and enter the month (1 to 12).
4. The display shows the month with the default day type set in the week plan
shown in brackets next to each weekday at the top. Exceptions are shown in
brackets next to the individual day of the month.
5. To reset the month select Clear all exceptions.
6. To set up an exception, select Set up exception day. Enter the day of month
to change and then the new day type required for that day.
7. To remove an exception day, select Cancel exception day and enter the day
of the month to return to its default week plan setting.
8. Use the left and right cursor keys to select the different months.
String and plan analysis can direct a call to a time analysis process. Each time
analysis process uses one of the 4 ARS time maps. The associated map sets the
current time category (A to F) when a call is made. The time analysis process (up
to 50) defines a call routing option for each time category.
Time analysis processes consist of a name, a time map reference and routing
options for each time category (A to F). The current time category is determined
from the time map (see "Setting Up Time Maps" on page 55).
Routes from a time analysis process :
– Use route list.
– Prefix with node number.
– Send untranslated over network.
– Apply translation over network.
To change a time analysis process :
1. From the Administration menu, select Automatic Route Selection and then
Time Analysis.
2. Select Time Analysis Process and enter the process number.
3. To change the processes' name, select Name and enter a name of up to 8
characters.
4. To change the time map that the process uses, select Time map and enter the
map number.
5. To clear all the existing processing select Clear all categories.
6. To clear the processing for a category select Clear category and enter the
category.
7. To change the processing for a category, select String processing and enter
the category. Select the processing required from the menu that appears.
8. Use the left and right cursors keys to select another time analysis process.
Automatic Route Selection (ARS)
Programming Manual
INDeX 9.1
Advertisement
Table of Contents
