Omron NXR Series User Manual page 260

11 Troubleshooting
Event name Error-level Device Event
Meaning An error-level event occurred in the IO-Link device.
Source EtherCAT Master Function Mod-
ule
Error attrib- Level
utes
Recovery
Effects User program
System-de- Variable
fined varia-
None
bles
Cause and Assumed cause
correction
Use CX-ConfiguratorFDT to con-
firm the IO-Link event code of the
IO-Link device.
Attached in- Attached information 1: Port where error occurred
formation
Precautions/ The emergency error code is FF6£ hex.
Note £ represents port number 1 to 8.
Remarks
11-24
Source details Slave
Observation
Reset error. If the error cannot be recovered, cycle the power supply to the slave be-
cause the error is continued in the IO-Link device.
Continues. Operation
Data type
---
Correction
Check the correction from the IO-
Link event code of the IO-Link
device.
1 hex: Port 1
2 hex: Port 2
3 hex: Port 3
4 hex: Port 4
5 hex: Port 5
6 hex: Port 6
7 hex: Port 7
8 hex: Port 8
NXR-series IO-Link Master Unit for EtherCAT User's Manual (W640)
Event code 84790000 hex
Detection tim-
ing
Log category System
Operation will continue.
It is possible that the data received from the IO-
Link device is not correct.
Name
---
Prevention
Check the prevention measures
from the IO-Link event code of
the IO-Link device.
Continuously