Flow Of Operations For The Cx-Configuratorfdt - Omron NXR Series User Manual

10 Setting Up IO-Link Devices
CX-ConfiguratorFDT
Version Information
You can use the gateway DTM "NXR-ILM08C-ECT" with the CX-ConfiguratorFDT version 3.01
or higher, or CX-ConfiguratorFDT version 2.59 or higher with automatic update as of January
2024 applied.
10-2-2

Flow of Operations for the CX-ConfiguratorFDT

For the CX-ConfiguratorFDT, use the following flow of operations to set parameters for the IO-Link de-
vices.
10-4
Network View Configuration
Computer (i.e., CX-ConfiguratorFDT): (My) Network
• Path from the computer (CX-ConfiguratorFDT) to the IO-Link Master Unit
Connected to the built-in EtherCAT port on the NJ/NX-series
Communications
CPU Unit or NY-series Industrial PC: "Nx built-in EtherCAT"
DTM
IO-Link master
Gateway DTM
NXR-series IO-Link Master Unit for EtherCAT User's Manual (W640)
NXR-series IO-Link Master Unit for EtherCAT
"NXR-ILM08C-ECT"
IO-Link device
DTMs for the IO-Link devices
Device DTMs