Installing The Cx-Configuratorfdt In Your Computer; Installing Iodd Files For Io-Link Devices From Other Companies In The Cx-Configuratorfdt.10-5; Installing Iodd Files For Io-Link Devices From Other Companies In The Cx-Configuratorfdt - Omron NXR Series User Manual

Start the CX-ConfiguratorFDT.
Create the
network
configuration.
Set the parameters for the device DTMs (IO-Link devices).
Export the network configuration you created to a file.
(Set the parameters in the IO-Link Master Unit with the Network Configurator in advance.)
Go online with the CX-ConfiguratorFDT.
Store the parameters in the IO-Link devices.
*1. The maximum number of device DTMs for one communications DTM is 64. If there are more than 64 device
DTMs, use more than one communications DTM.
10-2-3

Installing the CX-ConfiguratorFDT in Your Computer

If you install the Sysmac Studio or CX-One, the CX-ConfiguratorFDT is installed automatically.
Refer to A-7 Version Information on page A-68 for CX-ConfiguratorFDT versions that support the
gateway DTM for the NXR-series IO-Link Master Unit for EtherCAT.
10-2-4 Installing IODD Files for IO-Link Devices from Other Companies
in the CX-ConfiguratorFDT
If you use IO-Link devices from another company, you must install the IODD files (i.e., XML files) for
the IO-Link devices of that company in your computer.
An example of the installation procedure for the Windows 10 operation system is given below.
1
First, obtain the IODD files for the IO-Link devices from the device manufacturer.
2
Select IO-Link – IODD DTM Configurator from the Windows Start menu.
3
The IODDs that are currently installed in your computer are displayed on the Installed IODDs
tab page.
4
Click the Add IODD button, select the IODD files to add, and then click the Open button.
NXR-series IO-Link Master Unit for EtherCAT User's Manual (W640)
Place the communications DTM (Nx built-in EtherCAT) under (My) Network.
Place the gateway DTM (NXR-ILM08C-ECT) under the above communications
DTM (Nx built-in EtherCAT).
Place the device DTMs (IO-Link devices) under the above gateway DTM
(NXR-series IO-Link Master Unit for EtherCAT).
10 Setting Up IO-Link Devices
*1
10
10-5