10-1 Methods For Setting Io-Link Devices - Omron NXR Series User Manual

10 Setting Up IO-Link Devices

10-1 Methods for Setting IO-Link Devices

There are the following two methods to set IO-Link devices with the NXR-series IO-Link Master Unit
for EtherCAT.
• Setting IO-Link devices with the CX-ConfiguratorFDT
• Setting IO-Link devices with message communications
Refer to the following sections for how to set IO-Link devices with message communications.
• 6-2-2 Message Communications for IO-Link Communications on page 6-12
• A-3-3 Configuring IO-Link Devices through Message Communications on page A-52
The following section covers details on setting IO-Link devices with the CX-ConfiguratorFDT.
10-2
NXR-series IO-Link Master Unit for EtherCAT User's Manual (W640)