Operations Of Nt30/30C - Omron NT30C-ST141-E Operation Manual

Role and Operation of NT30/30C

1-1-2 Operations of NT30/30C

Displays Screens
Receives Data from a PC
Sends Data to a PC
Receives Screen Data
The information to be displayed (screen data) can be created on a computer by
using the NT-series Support Tool and stored in the NT30/30C. The screen data
can be displayed on the NT30/30C in response to the instructions from a PC/
Host or touch switch operation.
NT30/30C can be connected to a PC by a Host Link or NT Link and receive nec-
essary data from the PC.
Host Link, NT Link
Data input through a touch panel can be sent to a PC.
Touch panel
The screen data to be displayed on the NT30/30C can be created by a computer
using the NT-series Support Tool. Connect the NT30/30C to an IBM PC/AT or
compatible with an RS-232C cable so that the screen data are transferred to the
NT30/30C.
PC
The screen data designated by
instructions from PC/Host or
touch switch operation is
displayed.
PC
PC
ON/OFF information,
numeric data, etc.
Create screen data.
RS-232C
IBM PC/AT or
compatible
running the
Support Tool
Screen data
When using RS-232C to connect to the
PC, the connection is made only to transfer
screen data between the NT30/NT30C and
the NT-series Support Tool.
Section 1-1
3