Trane TR150 Programming Manual page 47

Parameters
5-53 Term. 29 High Ref./Feedb. Value
Range:
50
*
Size
related 999999.999
*
3 3
ReferenceFeed-
backUnit]
3.6.5 5-9* Bus Controlled
This parameter group selects digital and relay outputs via
a fieldbus setting.
5-90 Digital & Relay Bus Control
Range:
0 [0 -
*
0xFFFFFFFF ]
Bit 0 - 3 Reserved
Bit 4 Relay 1 output terminal
Bit 5 Relay 2 output terminal
Bit 6 - 23 Reserved
Bit 24 Terminal 42 Digital Output
Bit 25 Terminal 45 Digital Output
Bit 26 - 31 Reserved
Table 3.5 Bit Functions
46
Function:
[-4999 - 4999 ] Enter the high reference value
[-999999.999 - [RPM] for the motor shaft
speed and the high feedback
value, see also 5-58 Term. 33
High Ref./Feedb. Value. Select
terminal 29 as a digital input
(5-02 Terminal 29 Mode = [0]
input (default) and
5-13 Terminal 29 Digital Input =
applicable value).
Function:
This parameter holds the state of the digital
outputs and relays that is controlled by bus.
A logical '1' indicates that the output is
high or active.
A logical '0' indicates that the output is low
or inactive.
TR150 Programming Guide
BAS-SVP16A-EN - Rev. 2013-09-05