Table of Contents
Advertisement
Procedure 6-3 (continued)
Replacing the NT4K1472 BIP LED card
Step
4
5
Figure 6-5
Lifting the LED card upwards
AccessNode Modular Business Package VTBM Ring User Guide P0904244 Issue 1.0
Action
Grasp the two screws on the LED card and lift the card upward as high as it
will go (about 0.4 inches (10 mm), as shown in Figure 6-5.
Using the screws on the LED card as handles, push the bottom of the card
inward (1.) and lower the screws from their retaining slots (2.).
2.
1.
—continued—
Replacing modules in a BIP 6-9
2.
PC-11171
FW-11171
Advertisement
Table of Contents
