Procedure 6-1 (continued)
Replacing the NT4K64BA Alarm relay card
Step
5
AccessNode Modular Business Package VTBM Ring User Guide P0904244 Issue 1.0
Action
Replace the BIP cover.
Note: If the power to the BIP is applied and the load is powered on the left
and right side of the BIP, you may hear the relay chattering. This is normal and
will stop as soon as the load is applied to either side. To apply a load turn on
at least one cooling unit connected to the left side of the BIP and plug in at
least one circuit pack in the ABM shelf or turn on power to one of the CDS
shelves.
—end—
Replacing modules in a BIP 6-3