Table of Contents
Advertisement
Procedure 9-1 (continued)
Removing and installing an LVD
Step
12
13
14
15
16
Figure 9-4
Disconnecting the internal wiring and cabling
LVD output cable (Red) on the
contactor
AccessNode Modular Business Package VTBM Ring User Guide P0904244 Issue 1.0
Action
Remove the LVD cover plate by removing the 8 flat-head mounting screws as
shown in Figure 9-2.
Label and then disconnect the red and white leads of the NT4K84XA cable
from the LVD bus bar as shown in Figure 9-4.
Disconnect the red LVD output cable from the top of the contactor.
Dismount the LVD by using the socket set to remove the four 1/4-in. hex LVD
mounting bolts.
Remove the LVD from the cabinet.
LVD mounting bolts
(4 places)
—continued—
Replacing the low-voltage disconnect unit 9-7
FW-15674
NT4K84XA cable (Red, White) on
the bus bar
PC-15674
Advertisement
Table of Contents
