Testing the batteries and rectifiers
This chapter describes the tests to be performed on the rectifiers and batteries
prior to acceptance and also to be completed at regular intervals to check the
operation of the power system.
Chapter contents
This chapter contains the following information:
Topic
Warnings and cautions for testing batteries and rectifiers
Adjusting the float voltage
Load sharing adjustments for replacement rectifiers
Perform the procedures according to your requirements. If you are replacing a
rectifier, begin with "Replacing a rectifier," on page 8-14 and continue the
procedures, in order, to the end of this chapter.
AccessNode Modular Business Package VTBM Ring User Guide P0904244 Issue 1.0
Note: Some of these tests can only be completed on initial installation as
the batteries and the rectifier have to be isolated from the equipment.
8-1
8-
See
page 8-2
page 8-5
page 8-8
page 8-14
page 8-16
page 8-21
page 8-23
page 8-25