Nortel SONET AccessNode User Manual page 142

7-40 Replacing modules in a common-equipment shelf
Procedure 7-16 (continued)
Replacing an NT7E05 OC-12 VTBM optical interface
Step
8
Figure 7-11
Withdrawing the optical circuit pack
AccessNode P0904244 Issue 1.0
Action
Pull on the circuit pack ejector latches to slightly withdraw the circuit pack to
the extent necessary to disconnect it from the backplane connector (as
shown in Figure 7-11).
Note: Take care when withdrawing the circuit pack to prevent straining the
optical patch cords or pigtails.
Circuit pack
ejector latches
—continued—
PC-10352
FW-10352