Labels; Figure 2: Reference Of Brake Solenoid By Joints - Omron Regular Payload Series Hardware Installation Manual

4 / 5 /6
th th
WARNING:
1. Due to gravity, additional support is recommended when manually releasing the brake.
2. When manually moving each robot joint, the movement angle must be within a range of
+/- 45

2.10 Labels

The following labels, especially the warning ones, are attached to the locations where specific dangers may occur.
Be sure to comply with description and warnings of the labels when operating to keep the manipulator safely. Do
not tear, damage, or remove the labels. Be very careful if you need to handle the parts where the labels are
attached.
Regular Payload Series-Hardware Installation Manual TM5 Series
Joint
th

Figure 2: Reference of Brake Solenoid by Joints

。
.
1 /2 /3 Joint
st nd rd
14