Figure 58: Moving The Control Box (1/2); Figure 59: Moving The Control Box (2/2) - Omron Regular Payload Series Hardware Installation Manual

Connect the power cable to the control box

Place the control box near the robot base

The control box should be carried by at least two people. One should hold on to the control box handles,
while the other should hold the foot stands. Before handling, the cable of the robot stick should not be
pulled to avoid any performance degradation.
WARNING:
At this stage, do not connect the power cable of the control box to any electrical outlet, or it
may cause equipment damage.
Regular Payload Series-Hardware Installation Manual TM5 Series

Figure 58: Moving the Control Box (1/2)

Figure 59: Moving the Control Box (2/2)

66