Checking Labels; Warning Labels - Omron iX3 565 User Manual

dio Robot Integrated System Building Function with Robot Integrated CPU Unit Operation
Manual (Cat. No. W595) for more information.
High Power Indicator Check Procedure
Use the following procedure to verify that the High Power indicator is working correctly.
1. Apply Control Power to the robot and disable High Power.
2. Make a High Power request using one of the methods described in High Power Request
Methods on page 95.
3. Check that the High Power indicator flashes. After the High Power request is made and
the indicator is checked, the procedure is complete.

6.5 Checking Labels

All labels on the robot should be checked on a weekly basis for being present and legible. If
any of the labels are missing or illegible, they should be replaced. The labels, with part num-
bers, are listed below.

Warning Labels

The following warning labels are found on the robot.
Read User's Manual, Impact Warning Label (part number 18241-000)
l
This label instructs the user to read the user's manual before using the robot and to be
aware of the potential of impact by the robot.
This label is located near the status display on the iX3 body.
22792-000 Rev. A
Figure 6-1. Read User's Guide, Impact Warning Label
iX3 565 Robot with EtherCAT User's Manual
Chapter 6: Maintenance
103