Programming; Calling Up The Technician Level - DURKOPP ADLER 610-10 Service Instructions Manual

Programming

5
This chapter describes service settings:
• Presettings for sewing programs and functions
• Basic machine settings
• Advanced machine settings
• Test functions for individual elements in the machine
• Calibration functions
• Resetting the machine
Changes to stitch length, thread tension,curve support, etc. and the calling
up and compiling of sewing programs is described in the  Operating
Instructions.

5.1 Calling up the Technician level

All settings in the service menu must be carried out at the Technician level.
Important
For safety reasons, the pedal at the Technician level is not active!
While you can test the pedal input in the Multitest menu item, the
sewing motor is not activated by the pedal.
To select the Technician level:
1. Tap the SERVICE button.
 The input mask for the code appears on the display:
Fig. 84: Calling up the Technician level, input mask
2. Enter the code 25483 using the keypad.
 Each time a number is entered, the input cursor will automatically
3. Tap the OK button.
Service Instructions 610-10/630-10 - 01.0 - 12/2016
Programming
jump to the next position. The numbers are not shown for safety
reasons. A 0 appears at the relevant entry point; asterisks are in the
other positions.
89