Table of Contents
Advertisement
Displaying the System Information
This section explains how to display the system information.
The unit can display the following system information:
*« Amount of memory used
« Amount of data (points, routes, and tracks) stored in the unit
* Power counter (the counter starts when the power turns on; unit in minutes)
Use this information to check how much of the unit's memory is used.
To display the system information:
1
Press the MENU key to enter MENU mode.
2
Choose SYSTEM INFORMATION from
the menu.
The system information is displayed.
About the power counter
You can check the amount of the batteries used. When you change the batteries,
press the F4 key (RESET) to reset thé counter. The counter returns to O minute and
starts counting for the new batteries.
To cancel the system information display, press the F1 key (QUIT).
Getting Started with the Unit | 59
Advertisement
Table of Contents
