Displaying Rds Information; Receiver Operation - Sony STR-DA5200ES Operating Instructions Manual

Displaying RDS information

While receiving an RDS station,
press DISPLAY repeatedly.
Each time you press the button, RDS
information on the display changes cyclically
as follows:
PS (Program Service name)
(Program Type) indication
c)
t CT (Time) indication (in
Text) indication
24-hour system mode) t Sound field type t
Volume
a)
This information also appears for non-RDS FM
stations.
b)
Type of program being broadcast.
c)
Text messages sent by the RDS station.
Listening to a Sony digital music
player
For details on how to connect a Sony digital
music player to this receiver, refer to
"Listening to the music of a USB device"
(page 86).
1
Press RECEIVER to enable

receiver operation.

You do not need to press RECEIVER if
the other input buttons do not light up.
2
Press USB repeatedly to select
the Sony digital music player.
Other operations
To Do the following
Play Press H.
Press X. To resume play, press
Pause
the button again.
Stop Press x.
Select a folder Press ALBUM + or ALBUM –.
108
GB
a)
t PTY
b)
t RT (Radio
To Do the following
Select a track Press TRACK + or TRACK –.
Hold down m or M during
Find a point in a
track playback, and release the button
at the desired point.
Change a display Press DISPLAY repeatedly. The
text display will change as follows.
Track title t Album title t
Artist title t Genre title t
Sound field type t Volume
Operating the output to zone 2/
zone 3
For details on the connections and settings of
zone 2/zone 3, see "Listening to the sound in
another zone (ZONE 2/ZONE 3 operations)"
(page 98). Use the RM-AAU009 remote for
this operation.
The following operations are described for
connecting an IR repeater and operating the
receiver in zone 2 or zone 3. When an IR
repeater is not connected, use this receiver in
the main zone.
...
2
4
5