Table of Contents
Advertisement
_ Setting Up
Step 5D: Install the antenna remotely
To install the antenna remotely:
Loosen the screw, then remove the antenna holder from the rear of the
antenna.
Attach the velcro tapes (supplied) or two-sided adhesive tapes
Use the velcro tapes when you want to
(supplied) to the surface of the installation location and the rear of the
make the antenna detachable from the
antenna.
surface of the installation location.
Use the
two-sided adhesive tapes for a more
permanent installation.
Velcro tapes
Two-sided adhesive tapes
Notes:
* To use the tapes in the optimum condition,
leave the antenna for more than 24 hours
before starting to use the unit.
« When removing the antenna, detach the
tapes slowly.
24
Setting Up the Unit
Advertisement
Table of Contents
