Sony PYXIS IPS-760 Operating Instructions Manual page 36

Creating Navigation Routes
This section explains how to create and edit navigation routes.
To create a route, you can use the navigation points that you have already stored in
the unit or the IC memory cards. First plan your route from the starting point,
followed by the passing points and the final destination (see the figure below).
Passing points Fina! destination
Point 5
Starting point
Point 1
Point 2
In ROUTE mode, you can create, modify, delete, and search for routes.
To enter ROUTE mode. press the ROUTE key.
You can create new navigation routes. When you create a route, you can assign it a
route name. A route can hold up to 99 navigation points.
To create a new route:
1 Press the F1 key (NEW). -
To specify a point, refer to "Specifying
2 Specify the starting point. ee ae Note:
Positions" on page 27.
3 Specify the passing points consecutively. 'gi vue. ore
Finally specify the destination point. = eae |
The number of points in the route is displayed = aera
on the screen. |
To continue specifying the next point, press Si
the ENTER key. we
To specify the previous point, press the a4 face St | |
RECALL key. ee
Getting Started With the Unit 37