Sony PYXIS IPS-760 Operating Instructions Manual page 72

Unit of Direction: Select direction display: degrees or compass points. Set to
Degree when determining your travelling direction precisely. Set to Compass when
determining your travelling direction roughly. Default setting is "Degrees."
270" 90"
180°
Degree display NSEW display
GPS Reset: Initialize the antenna's orbital information. You have to wait for a while
to acquire your current position after executing this option. Use this option if you
cannot acquire your current position for more than 20 minutes after resetting your
approximate position and place the antenna in a location with no line-of-sight
obstructions.
To change a position setting:
1 Press the MENU key to enter MENU mode.
2 Choose POSITION SETTING from the menu.
3 Select the option of the setting using the T J key.
4 Change the setting using the 7 J key.
To continue changing the settings, repeat steps 3 and 4.
When you have finished changing the settings, press the F2 key (END).
The unit backs up the previous settings when you change them. To change the
setting to the previous setting. press the F3 key (CANCEL).
To cancel the position setting, press the F1 key (QUIT).
Customizing the Unit 73