Henny Penny FSHN610 Service Instructions Manual page 36

Service menu - appliance test
No. Basic setting
50 Controls the cooking chamber
lamp when closing the
cooking chamber door
92 Flashing of the cooking
chamber light at the end of the
program
110 Representation of power
optimization system
602 Maximum power outage
duration for a warm start
607 Ready to Cook active
609 Interval for saving the
temperatures in the HACCP
log
618 Ready to Cook – Finished
message interval
624 SES status
625 Minimum duration of cooking
program for SES
655 Limitations for Arabic
662 Lock screen active
674 Auto-start
678 Scanner button available
695 PIN for operation lock
726 Cleaning reminder
36
Standard Adjustment
worth range
0 0-60 seconds
1 0 = Off
1= On
0 0 = Off
1= On
100 s 90 – 600
seconds
1 0 = Off
1 = On
120 s 1 – 180
seconds
60 s 0 – 300
seconds
1 0 = Off
1 = On
6 min. 4-6 minutes
0 0 = Off
1 = On
0 0 = Off
1 = On
0 0 = No autostart
1= Direct
favorites
2=Always
1 0 = Hidden
1= Visible
369 0 – 99999
1800 0 = Off
1800 = On
Service-instructions
Explanation
Representation in the status information.
Activate additional parameter 42.
Time within which the cooking program will
continue after interruption of the power supply.
With value "0" Ready2Cook is permanently
deactivated.
Reminder interval after reaching the
Ready2Cook temperature
When the value is "0", the SES function is
permanently deactivated.
If the overall duration of a cooking program is
less than this value, the SES does not run.
When the value is "1", no cooking programs
for pork are displayed
Display of Lock Screen menu item
Automatic start of a cooking program after
selection from AutoChef / Favorite
Display of scanner function in the title bar.
Activation / deactivation of the WaveClean
cleaning reminder