Table of Contents
Advertisement
Figure 72. Removing the system board
Next step
1
Install the system
board.
Installing the system board
Prerequisites
1
Follow the safety guidelines listed in the
2
Follow the procedure listed in the
3
If you are replacing the system board, remove all the components listed in the
Steps
1
Holding the system board holder, lower the system board into the system.
CAUTION:
Do not lift the system board by holding a memory module, processor, or other components.
CAUTION:
Take care not to damage the system identification button while placing the system board into the system.
2
Incline the system board at an angle and align the connectors on the system board with the slots on the rear of the chassis.
3
Slide the system board toward the rear of the chassis until the connectors are firmly seated in the slots.
Safety
instructions.
Before working inside your
system.
Removing the system board
Installing and removing system components
section.
97
Advertisement
Table of Contents
