Table of Contents
Advertisement
Figure 10. Installing the front bezel
System cover
Removing the system cover
Prerequisites
1
Follow the safety guidelines listed in the
2
Disconnect the system from the electrical outlet and disconnect the peripherals.
3
If applicable, remove the system from the rack.
NOTE:
For more information, see the
Steps
1
Using a 1/4 inch flat head or a Phillips #2 screwdriver, turn the lock on the release-latch counterclockwise to the unlock position.
2
Open the release-latch until the system cover slides back.
3
Lift the cover away from the system.
42
Installing and removing system components
Safety
instructions.
Rail Installation Guide at Dell.com/poweredgemanuals.
Advertisement
Table of Contents
