Figure 40. Installing the expansion card riser filler
Next step
1
If applicable,
replace the expansion card
Installing the expansion card riser
Prerequisites
1
Follow the safety guidelines listed in the
2
Follow the procedure listed in the
3
Remove the air
shroud.
4
Install the expansion card in the expansion card
Steps
1
If applicable, remove the expansion card riser filler bracket by performing the following steps:
a
Open the blue expansion card retention latch lock.
b Using a Phillips #2 screwdriver, remove the screw securing the expansion card riser filler to the system board.
c
Slide the expansion card riser filler bracket up and out of the system.
70
Installing and removing system components
riser.
Safety
instructions.
Before working inside your
riser.
system.