Table of Contents
Advertisement
Figure 31. Removing the cabled drive from the drive carrier
Next step
1
Install the drive into the drive
Installing a cabled drive into the drive carrier
Prerequisites
1
Follow the safety guidelines listed in the
2
Follow the procedure listed in the
3
Remove the front
bezel.
Steps
1
Insert the drive into the drive carrier with the connector end of the drive toward the back of the drive carrier.
2
Align the screw holes on the drive with the screw holes on the drive carrier. When aligned correctly, the back of the drive is flush with
the back of the drive carrier.
3
Install the screws to secure the drive to the drive carrier.
carrier.
Safety
instructions.
Before working inside your
system.
Installing and removing system components
61
Advertisement
Table of Contents
