Figure 59. Installing the MicroSD card
Next steps
1
Install the IDSDM or vFlash module.
2
Follow the procedure listed in the
Drive backplane
Drive backplane
The PowerEdge R240 system supports 3.5-inch (x4) SAS/SATA backplane.
Figure 60. 3.5-inch (x4) SAS/SATA backplane
1
Release tab (2)
3
Backplane Power A connector (BP_PWR_A)
88
Installing and removing system components
After working inside your
system.
2
Backplane SAS A0 connector (BP_SAS_A)
4
Backplane signal connector (BP_SIG)