Removing A Memory Module; Installing A Memory Module - Dell EMC PowerEdge R240 CHRH4 Installation And Service Manual

Removing a memory module

Prerequisites
WARNING: Allow the memory modules to cool after you power off the system.
1 Follow the safety guidelines listed in the
2 Follow the procedure listed in the
3 Remove the air shroud.
Steps
1 Locate the appropriate memory module socket.
CAUTION: Handle each memory module only by the card edges, ensuring not to touch the middle of the memory module or
metallic contacts.
2 Push the ejectors outward on both ends of the memory module socket to release the memory module from the socket.
3 Lift and remove the memory module from the system.
NOTE: If you are removing the memory module permanently, install a memory module blank. The procedure to install a
memory module blank is similar to that of the memory module.
Figure 36. Removing a memory module
Next step
1 Replace the memory

Installing a memory module

Prerequisites
1 Follow the safety guidelines listed in the
2 Follow the procedure listed in the
3 Remove the air shroud.
Steps
1 Locate the appropriate memory module socket. If installed,
66 Installing and removing system components
Safety instructions.
Before working inside your
module.
Safety instructions.
Before working inside your
system.
system.
remove the memory module or memory module blank.