Table of Contents
Advertisement
Figure 44. Installing the expansion card filler
Next step
1
Install the expansion card into the expansion card riser.
Installing expansion card into the expansion card riser
Prerequisites
1
Follow the safety guidelines listed in the
2
Follow the procedure listed in the
3
If installing a new expansion card, unpack it and prepare the card for installation.
NOTE:
For instructions, see the documentation accompanying the card.
4
Remove the air
shroud.
5
Remove the expansion card
Steps
1
Remove the filler bracket.
NOTE:
Store the filler bracket for future use. Filler brackets must be installed in empty expansion card slots to maintain
Federal Communications Commission (FCC) certification of the system. The brackets also keep dust and dirt out of the
system and aid in proper cooling and airflow inside the system.
Safety
instructions.
Before working inside your
riser.
system.
Installing and removing system components
73
Advertisement
Table of Contents
