Table of Contents
Advertisement
f
Internal Dual SD
4
Disconnect all the cables that are connected to the system board.
CAUTION:
Take care not to damage the system identification button while removing the system board from the system.
CAUTION:
Do not lift the system board by holding a memory module, processor, or other components.
Steps
1
Using a Phillips #2 screwdriver, remove the screws securing the system board to the chassis.
Figure 71. Screws securing the system board
2
Holding the system board holder, slightly lift the system board, and slide the system board to the front of the system.
3
Using the system board holder, lift the system board out of the system.
96
Installing and removing system components
module, if installed
Advertisement
Table of Contents
