Table of Contents
Advertisement
Restoring the system using Easy Restore
The easy restore feature enables you to restore your service tag, license, UEFI configuration, and the system configuration data after
replacing the system board. All data is backed up in a backup flash device automatically. If BIOS detects a new system board, and the
service tag in the backup flash device, BIOS prompts the user to restore the backup information.
Below is a list of options available:
•
Restore the service tag, license, and diagnostics information, press Y
•
Navigate to the Lifecycle Controller based restore options, press N.
•
Restore data from a previously created Hardware Server Profile, press F10
NOTE:
When the restore process is complete, BIOS prompts to restore the system configuration
data.
•
To restore the system configuration data, press Y
•
To use the default configuration settings, press N
NOTE:
After the restore process is complete, system reboots.
Manually update the Service Tag
After replacing a system board, if Easy Restore fails, follow this process to manually enter the Service Tag, using System Setup.
About this task
If you know the system service tag, use the System Setup menu to enter the service tag.
Steps
1
Power on the system.
2
To enter the System Setup, press F2.
3
Click Service Tag Settings.
4
Enter the service tag.
NOTE:
You can enter the service tag only when the Service Tag field is empty. Ensure that you enter the correct service
tag. Once the service tag is entered, it cannot be updated or changed.
5
Click OK.
Trusted Platform Module
Upgrading the Trusted Platform Module
Prerequisite
NOTE:
•
Ensure that your operating system supports the version of the TPM module being installed.
•
Ensure that you download and install the latest BIOS firmware on your system.
•
Ensure that the BIOS is configured to enable UEFI boot mode.
About this task
CAUTION:
Once the TPM plug-in module is installed, it is cryptographically bound to that specific system board. Any attempt to
remove an installed TPM plug-in module breaks the cryptographic binding, the removed TPM cannot be reinstalled or installed on
another system board.
Installing and removing system components
99
Advertisement
Table of Contents
