Figure 33 Local_Call Lcr; Figure 34 Dial Condition For Local_Call Lcr - ZyXEL Communications IP PBX X6004 User Manual

Figure 33 local_call LCR

3 The Dial Condition screen appears as shown.
• Type 0 followed by a period (.) in the Dial Condition field. This means that this LCR
will be used when callers dial any number that begins with a 0. The period (.) is a
wildcard character, meaning anything can follow the zero.
• Test the dial condition. In our example, we tested the number 05555555 to see if it
matches our dial condition. You can test any number by typing it in the Number
Pattern Test field and clicking the Right icon; an
matches the dial condition and an
• Specify an offset value. In our example, we configure an offset value of 1. The offset
value tells the X6004 how many initial digits (if any) it should strip off of the dialed
number before routing the call to the external line. See
example.
• Click Apply to save your settings.

Figure 34 Dial Condition for local_call LCR

4 You are done configuring the LCR. However, before it can be used by any of the phones
connected to the X6004, the LCR needs to be assigned to an appropriate authority group.
X6004 User's Guide
O appears, if the number typed in
X appears if it does not match the dial condition.
Figure 37 on page 55
Chapter 3 Tutorials
for an
53