Table of Contents
Advertisement
Chapter 15 Ring Group
Table 54 Configuration > PBX > Extension Management > Ring Group > Advanced
LABEL
Type
Description
Add, Edit, Delete
Hunt
Delete
Entry Number
Type
Description
Add, Edit, Delete
15.2.4 Add/Edit Page Group Screen
The screens for editing or adding page groups on the X6004 contain the same fields. Only the
screen used to add page groups is shown below. Click the Add (or Edit) icon in the Paging
section of the Ring Group configuration screen to view the screen as shown.
Figure 125 Add/Edit Page Group
Each field is described in the following table.
Table 55 Add/Edit Page Group
LABEL
Entry Number
Pincode
148
DESCRIPTION
This field displays "page".
This field displays the description for this page group.
Click:
•
Add - to create a new page group.
•
Edit - to configure the settings of a page group.
•
Delete - remove an existing page group.
Use this section to manage hunt groups.
Check the Delete box(es) and click Delete to remove hunt groups.
This field displays the number you have to dial to call the extensions in this hunt
group.
This field displays "hunt".
This field displays the description for this hunt group.
Click:
•
Add - to create a new hunt group.
•
Edit - to configure the settings of a hunt group.
•
Delete - remove an existing hunt group.
DESCRIPTION
Type the number you have to dial to call the extensions in this page group. This
number can be from 1 to 16 digits long.
Type the password you have to dial to call the extensions in this page group. This
number can be from 0 to 16 digits long and you can also use the "*" key. If you
leave this field blank then callers do not have to dial a Pincode to call the
extensions in this page group.
X6004 User's Guide
Advertisement
Table of Contents
