Table of Contents
Advertisement
• Click Apply to save your settings.
You are done configuring the LCR. However, before it can be used by any of the
4
phones connected to the X2002, the LCR needs to be assigned to an appropriate
authority group.
3.2.3 Assigning an LCR to an Authority Group
The Group Management screen allows you to give an authority group (and the
extensions in that group) the right to use an LCR (outbound dial condition). In our
example, we give the authority group Basic the right to call out using the LCR
local_call.
Procedure:
Click Configuration > PBX > Group Management to view the following screen.
1
X2002 User's Guide
Chapter 3 Tutorials
55
Advertisement
Table of Contents
