Table of Contents
Advertisement
Chapter 6 Network Deployment
6.4.1 DYNDNS Wildcard
Enabling the wildcard feature for your host causes *.yourhost.dyndns.org to be aliased to the
same IP address as yourhost.dyndns.org. This feature is useful if you want to be able to use,
for example, www.yourhost.dyndns.org and still reach your hostname.
If you have a private WAN IP address, then you cannot use Dynamic DNS.
6.4.2 DDNS Configuration
Use this screen to configure your Dynamic DNS settings. To access this screen, click
Configuration > Network > DDNS.
Figure 77 Configuration > Network > DDNS
Each field is described in the following table.
Table 14 Configuration > Network > DDNS
LABEL
DDNS Type
User Name
Password
Domain name
Enable Wildcard
Option
Interface
Mail Exchanger
Apply
Reset
88
DESCRIPTION
Select the type of service that you are registered for with your Dynamic DNS
service provider.
Type your user name.
Type the password assigned to you.
Type the domain name assigned to your X6004 by your Dynamic DNS provider.
You can specify up to two host names in the field separated by a comma (",").
Select the check box to enable DynDNS Wildcard.
This field displays the interface registered to use DDNS services. On the X6004 it
always displays "WAN".
Use this field if the mail exchange server in your organization has a dynamically
assigned IP address and you have not already registered it with a Dynamic DNS
provider. Enter the domain name of your mail exchange server.
Click this to save your changes.
Click this to set every field in this screen to its last-saved value.
X6004 User's Guide
Advertisement
Table of Contents
