Zystack Setting; Zystack Add Screen; Figure 189 Configuration > Zystack > Setting; Figure 190 Zystack Add - ZyXEL Communications IP PBX X6004 User Manual

23.2 ZyStack Setting

Use this screen to view and manage your ZyStack settings. Click Configuration > ZyStack >
Settings in the navigation panel to view the screen as shown.
Figure 189 Configuration > ZyStack > Setting
The following table describes the labels in this screen.
Table 92 ZyStack > Setting
LABEL
Machine ID
Description
WAN IP
LAN IP
Z_Interface
Type
Add / Edit /
Reboot / Delete

23.2.1 ZyStack Add Screen

Use this screen to add an X6004 to your ZyStack. Click the Add icon in the Configuration >
ZyStack > Setting screen to view the screen as shown.

Figure 190 ZyStack Add

X6004 User's Guide
DESCRIPTION
This field displays the system name of the X6004. The system name is automatically
assigned to the X6004 based on when it was added to the ZyStack. IPPBX_01 is
always the master followed by slaves IPPBX_02, IPPBX_03 and so on.
This field displays the description of this ZyStack member.
This field displays the WAN IP address of the X6004.
This field displays the LAN IP address of the X6004.
This field displays the interface (LAN or WAN) which the X6004s use to form the
ZyStack. This interface is the same for all X6004 in the ZyStack.
This field displays the role this X6004 performs in the ZyStack. The options are:
• Master - controls configuration on all the other X6004s.
• Slave - all configuration is done on the slave from the master X6004.
Click the Add icon to create or expand a ZyStack by configuring a new member.
Click Edit to change the settings of an existing ZyStack member.
Click Reboot to shut down and restart a specific member of the ZyStack.
Click Delete to remove an existing member from a ZyStack.
Chapter 23 ZyStack
209